Router Table Safety
A router table is a powerful woodworking tool that can shape, trim, and profile wood. Because the router bit spins at very high speed, safe setup and operation are essential.
Before using the router table:
- Wear safety glasses or a face shield and suitable hearing protection.
- Avoid loose clothing, jewellery, and tie back long hair.
- Check that the router bit is sharp, undamaged, and securely tightened.
- Ensure the router is switched off and unplugged before changing bits or making adjustments.
- Set the bit height and fence correctly before starting.
- Make sure guards and featherboards, if fitted, are properly positioned.
During operation
- Feed the workpiece against the rotation of the bit (typically from right to left when the fence is behind the bit).
- Keep your hands a safe distance from the cutter.
- Use push sticks, push blocks, or other aids for small or narrow workpieces.
- Maintain firm control of the workpiece against the fence and table.
- Take several light passes instead of trying to remove too much material at once.
- Allow the router to reach full speed before beginning the cut.
- Never reach over or behind the spinning cutter.
After use
- Switch off the router and wait until the bit has stopped completely before removing the workpiece or making adjustments.
- Disconnect the power before changing bits or performing maintenance.
- Clean away sawdust and debris from the table and fence.
- Store router bits safely to protect their cutting edges.