Warragul Woodworkers Club Inc

Lathe Safety

Lathe safety is essential because a rotating workpiece can catch clothing, tools, or hands very quickly. Following good practices helps reduce the risk of serious injury.

Here are some key safety guidelines:

  • Before using the lathe
    Wear appropriate eye protection, such as safety glasses or a face shield.
  • Tie back long hair and avoid loose clothing, jewellery, gloves, or anything that could become entangled.
  • Ensure the workpiece is securely clamped in the chuck or mounted between centres.
  • Remove the chuck key immediately after tightening the chuck.
    Check that the cutting tool is sharp, securely mounted, and set at the correct height.
  • Select the appropriate spindle speed for the material and workpiece size.

During operation

  • Stand slightly to one side when starting the machine, especially with a newly mounted workpiece.
  • Keep hands away from rotating parts.
    Never touch or try to stop a spinning workpiece by hand.
    Use a brush or chip hook to remove swarf—never your hands. Be especially careful with long, stringy metal swarf, which can be very sharp.
  • Make adjustments or measurements only after the spindle has come to a complete stop.
    Stay focused and avoid distractions while the lathe is running.
Scroll to Top